You can chip or spread it however you like! It's so much fun, you won't be able to stop poking it!
The "Tsuntsun Brush" is characterized by its thick, short tip, which is designed for poking the paint with the tip.
It has been adjusted to have enough strength to paint neatly on everything from small dots to large dots.
If you apply the paint by dabbing it with the tip, chipping is also easy.
The "Tsuntsun Brush" comes in two sizes, S and M, which differ in thickness and length.
[M] is 3mm wide and 6mm long. It is longer and thicker than the S. The tip of the brush allows you to boldly apply dots or spread the paint.
● A brush that embodies the attention to detail that goes into model painting!
"Kamifude" is a delicate brush, with each individual bristle crafted by a brush craftsman who specializes in synthetic hair.
Unlike typical synthetic fiber brushes, the bristles do not dry out or break easily, so you can always maintain the comfort of using the brush as if it were freshly grated.

The bristles are made of pure Japanese synthetic bristles (PBT) that are also designed to be strong.
The brushes themselves are also made by Japanese brush craftsmen who specialize in artificial hair, and each brush is made by hand.
When animal hair brushes are immersed in solvents, the hair tends to get damaged, break off, or become brittle, but Kamifuji's hair is made of PBT bristles that are resistant to solvents, so it is less likely to get damaged.
The glue that holds the brush tip in place is also solvent-resistant, so the brush tip will stay in good condition for a long time.
The stiffness has been adjusted to make it easier to paint models with a brush, so the tip is more flexible than that of typical synthetic fiber brushes.
We have a variety of brush tip shapes so you can use them according to the painting situation.
If the brush tip is too short, the paint will not absorb as much water, causing it to dry out quickly.
For this reason, we design the length of the brush tip to strike a balance between ease of drawing and water absorption.
The specially processed PBT bristles allow even bent bristles to be restored to their original straight tip by using hot water of 90°C or higher.
Comes with a dedicated aluminum cap for easy storage and carrying
How to fix a brush with bent bristles:
Remove any dirt from the brush before soaking it in hot water.
*Be careful not to get burned as the water used is over 90℃.

1. Fill a heat-resistant container with hot water of 90°C or higher and immerse the tip of the bent brush for around 10 seconds.
2. Use the wall of the container with hot water to straighten the bent part of the bristles.
3. Pull the brush up along the wall while maintaining the straightness.
4. Check that the base of the brush you pulled up is straight, then let it dry and you're done.

*If the bristles have reached the end of their life, they may not be able to be straightened.
*Please note that if the hot water becomes lukewarm during the process, the brush will not be able to be straightened properly.